Kramer VP704xl

COMPUTER INPUT: Analog RGB/YPbPr on 15-Pin HD connectors into 75Ω, supporting RGBHV, RGsB, YPbPr, auto-terminating into 75Ω Digital sync (in RGBHV mode): TTL Level, 10K termination, pos or negative Analog sync (in RGsB, YPbPr, YUV modes): 0.3V negative. RGB Level Range: 0.5-2.0Vpp Scan Rate Detection: automatic PC Resolutions: any up to 2048x2048 HDTV Resolutions: any up to 1080p Max horizontal scan rate: 150kHz VIDEO INPUTS: Composite video on BNC connectors. S-Video (YC) on 4-Pin mini-DIN connectors. CV/YC video decoder: 8-bit Digital Input impedance: 75Ω Television standards supported: NTSC and PAL De-Interlacing (NTSC / PAL): pixel-level motion adaptive Comb filter decoding: adaptive Film mode (NTSC) 3:2 pull down CV/YC Video adjustments: contrast, brightness, saturation, hue (NTSC) CV/YC sub-carrier lock range: +/- 200Hz (NTSC), +/- 250Hz (PAL) VIDEO OUTPUTS: Composite Video 1Vpp on BNC connectors. S-Video (YC) 1Vpp on 4-pin mini-DIN connectors CV/YC Video encoder: 8/10-bit Digital Output impedance 75Ω Television standards supported: NTSC and PAL. COMPUTER OUTPUTS: RGBHV loop YPbPr (0.7V RGB / 1.0V sync-tip to white, approx. 0.4VDC offset) HDTV Resolutions: any up to 1080p Vertical Refresh Rate: any to 250Hz CONTROL METHODS: The unit can be controlled locally via the front panel buttons and on-screen display (OSD), remotely via the RS-232 interface using a D9 female connector or again remotely via the Infrared remote using the Infrared remote unit. SCALING / SAMPLING / MEMORY: Size and position: automatic via AutoSet or Manual. Image size: user-definable presets. Image freeze: one video frame. Settings memory: non-Volatile. Zoom range: variable to 10x Zoom (1000%). Firmware memory: flash, upgradeable via RS-232 LOCKING/MIXING: CV/YC SC/H phase adjustments: +/- 180°rees (for units with CV/YC output only) Keyer: chromakey (YUV) or lumakey (Y) Mixer: PC / Video, foreground/background swappable PIP: variable window size & position – single-button enabling (Not all locking/mixing combinations are available: you cannot overlay one CV or YC source over a different CV or YC source, or one RGB/YUV source over another RGB/YUV source – you are restricted to overlaying CV/YC over RGB/YUV, or RGB/YUV over CV/YC (the exception is where you can overlay one source over itself). POWER REQUIREMENT: 100-240V AC, 50-60Hz, 0.3A max. WEIGHT: 2.4kg (5.3lbs) approx. DIMENSIONS: 48.2cm x 17cm x 4.5cm (19” x 6.75” x 1.75”) W, D, H.