IFS VAADT14130WDM
Product Description
• 10-Bit Digitally Encoded Video Transmission
• Exceeds RS-250C Short-Haul Transmission
• NTSC, PAL, SECAM Compatible
• Full Color Compatibility • NTCIP Compatible
• 20-Bit Digitally Encoded Stereo Audio
• 600 Ohm Impedance Line-Level Audio
• No In-field Electrical or Optical Adjustments Required
• Reverse Sync for Genlock
• LED Status Indicators for Monitoring all Critical
Operating Parameters
• Hot-Swappable Rack Modules
• Automatic Resettable Fuses on all Power Lines
• Tested and Certified by an Independent Testing Laboratory
for Full Compliance with the Environmental Requirements
(Ambient Operating Temperature, Mechanical Shock,
Vibration, Humidity with Condensation, High-Line/Low-Line
Voltage Conditions and Transient Voltage Protection) of
NEMA TS-1/TS-2 and the Caltrans Specification for Traffic
Signal Control Equipment
• Distances up to 43 Miles (69 km)
• Comprehensive Lifetime Warranty
Specifications: Video Video Input/Output: 1 volt pk-pk (75 ohms) Bandwidth: 5 Hz - 10 MHz Differential Gain: <2% Differential Phase: <0.7° Tilt: <1% Signal-to-Noise Ratio (SNR): >67 dB Data Data Interface: RS-232, RS-422, 2 or 4-Wire RS-485 with Tri-State Data Format: NRZ, NRZI, Manchester, Bi-phase Data Rate: DC-100 Kbps (NRZ) Operating Mode: Simplex or Full-Duplex Audio No. of Bits: 20 Sampling Rate: 52.3 KHz Bandwidth: 20 Hz to 18 KHz @ -1 dB Signal-to-Noise Ratio (SNR): 87 dB Minimum Maximum Input/Output Level: 0 dBm across 600 ohms Channel Crosstalk: -100 dB @ 1 KHz Total Harmonic Distortion: 0.01% @ 0 dB Output Level DTE/DCE Interface: User-Selectable Input/Output: Balanced or Unbalanced, 600 ohms Wavelength 1310/1550 nm, Single Mode Number Of Fibers 1 Connectors Optical: ST, SC or FC (see ordering information) Power, Audio, Data: Terminal Block with Screw Clamps Video and Reverse Sync: BNC (Gold Plated Center-Pin) ElectricaL & Mechanical Power: Surface Mount: 12 VDC @ 500 mA Rack: From Rack Number of Rack Slots: 2 Current Protection: Automatic Resettable Solid-State Current Limiters Circuit Board: Meets IPC Standard Size (in./cm.) (LxWxH) Surface Mount: 7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
Specifications: Video Video Input/Output: 1 volt pk-pk (75 ohms) Bandwidth: 5 Hz - 10 MHz Differential Gain: <2% Differential Phase: <0.7° Tilt: <1% Signal-to-Noise Ratio (SNR): >67 dB Data Data Interface: RS-232, RS-422, 2 or 4-Wire RS-485 with Tri-State Data Format: NRZ, NRZI, Manchester, Bi-phase Data Rate: DC-100 Kbps (NRZ) Operating Mode: Simplex or Full-Duplex Audio No. of Bits: 20 Sampling Rate: 52.3 KHz Bandwidth: 20 Hz to 18 KHz @ -1 dB Signal-to-Noise Ratio (SNR): 87 dB Minimum Maximum Input/Output Level: 0 dBm across 600 ohms Channel Crosstalk: -100 dB @ 1 KHz Total Harmonic Distortion: 0.01% @ 0 dB Output Level DTE/DCE Interface: User-Selectable Input/Output: Balanced or Unbalanced, 600 ohms Wavelength 1310/1550 nm, Single Mode Number Of Fibers 1 Connectors Optical: ST, SC or FC (see ordering information) Power, Audio, Data: Terminal Block with Screw Clamps Video and Reverse Sync: BNC (Gold Plated Center-Pin) ElectricaL & Mechanical Power: Surface Mount: 12 VDC @ 500 mA Rack: From Rack Number of Rack Slots: 2 Current Protection: Automatic Resettable Solid-State Current Limiters Circuit Board: Meets IPC Standard Size (in./cm.) (LxWxH) Surface Mount: 7.0 x 4.0 x 2.0 in., 17.8 x 10.2 x 5.1 cm Rack Mount: 7.7 x 5.0 x 2.0 in., 19.6 x 12.7 x 5.1 cm
 |
