IFS D7600-SS-E
Product Description
The IFS EtherNav D7600 series of Managed Ethernet Switches
provide robust transmission of 10/100 BASE-T Ethernet data.
Unlike most Ethernet switches, these environmentally hardened
units are designed for direct deployment in difficult out-of-plant or
roadside operating environments, and are available for use with
either conventional CAT-5e copper or optical transmission media.
Depending upon the configuration ordered, up to 9 electrical or 6
electrical and 3 optical ports are available for easily implementing
point-to-point, linear add-drop/ drop-and-repeat, star, or true
self-healing ring and mesh network system architectures.
The electrical ports support the 10/100 Mbps (10/100 BASE-T)
Ethernet IEEE 802.3 protocol, and auto-negotiating and auto-MDI/
MDIX features are provided for simplicity and ease of installation.
A 1000 BASE-T or 1000 BASE-FX port (specified at time of order)
is optionally available for optically or electrically linking D7600
series switches when additional IP communications ports are
required, allowing simple and cost-effective future expansion of
the network if required. Available for use with multimode or single
mode optical fiber, these network managed (through SNMP),
Layer 2 switches are optically (100 BASE-FX) and electrically
compatible with any IEEE 802.3 compliant Ethernet device. Plugand-
play design ensures ease of installation, and no electrical
or optical adjustments are ever required. LED indicators are
provided for rapidly ascertaining the operating status of the
managed switch and network, and these units are available in
stand-alone/shelf-mount, wall-mount, rack-mount or DIN-rail
mounting configurations.
Features: Environmentally hardened for direct deployment in difficult unconditioned out-of-plant and roadside installations. Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and CALTRANS Traffic Signal Control Equipment Specifications. Extended Ambient Operating Temperature Range, -40? C to +74? C NTCIP Compatible 10/100/1000 BASE-T and 100/1000 BASE-FX Compatible (Depending on configuration ordered) High Single Mode Optical Power Budget Available Available in Stand-Alone/Shelf-Mount, Wall-Mount, Rack-Mount and DIN Rail Mounting Configurations Redundant Power Supply Capability Reduces Possibility of Single- Point-of-Failure for Highest Possible Reliability Fully Configurable Through Web-Based or SNMP Network Management Fully supports IGMP and IP Multicasting and Filtering Port Based VLAN (IEEE 802.1Q) Rapid Spanning Tree Protocol (IEEE 802.1W) Designed and Manufactured in the USA Readily Available Comprehensive Lifetime Warranty
Features: Environmentally hardened for direct deployment in difficult unconditioned out-of-plant and roadside installations. Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and CALTRANS Traffic Signal Control Equipment Specifications. Extended Ambient Operating Temperature Range, -40? C to +74? C NTCIP Compatible 10/100/1000 BASE-T and 100/1000 BASE-FX Compatible (Depending on configuration ordered) High Single Mode Optical Power Budget Available Available in Stand-Alone/Shelf-Mount, Wall-Mount, Rack-Mount and DIN Rail Mounting Configurations Redundant Power Supply Capability Reduces Possibility of Single- Point-of-Failure for Highest Possible Reliability Fully Configurable Through Web-Based or SNMP Network Management Fully supports IGMP and IP Multicasting and Filtering Port Based VLAN (IEEE 802.1Q) Rapid Spanning Tree Protocol (IEEE 802.1W) Designed and Manufactured in the USA Readily Available Comprehensive Lifetime Warranty
 |
