IFS D1410WDMB-R3

• Compatible with Siemens SU301 Camera Control Unit and SUT48 Universal Keyboard • Compatible with Johnson Controls Security Solutions (Cardkey Protocol “B”) • Point-to-Point Topology • No In-field Electrical or Optical Adjustments Required • Power, Transmit and Receive Data Status LED Indicators • Integrated WDM for Greater Product Reliability • Automatic Resettable Solid-State Current Limiters • Tested and Certified by an Independent Testing Laboratory for Full Compliance with the Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity with Condensation, High-Line/Low-Line Voltage Conditions and Transient Voltage Protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. • Hot-Swappable Rack Modules • Distances up to 2.5 Miles (4 km) • Comprehensive Lifetime Warranty

Specifications Part Number Opt. Pwr. Budget Max. Distance* Multimode 62.5/125?m** 2.5 miles (4 km) PS-12VDC 12 Volt DC Plug-in Power Supply (Included) PS-12VDC-230 12 Volt DC Plug-in Power Supply, 230 VAC Input (Included if specified at time of order) Add ‘-R3’ to Model Number for R3 Rack Mount - No Charge (Requires R3 Rack purchased separately) Add ‘-C’ for Conformally Coated Printed Circuit Boards (Extra charge, consult factory) D1410 D1410WDMA? D1410WDMB 2 1 1 Fibers Required 14 dB *Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget. ?All accessories are third party manufactured. ?WDMA must mate with WDMB. Current Loop Transceiver (850 nm) Current Loop Transceiver (850/1310 nm) Current Loop Transceiver (1310/850 nm) Accessories? Description Ordering Information Made in the USA Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J Data Data Interface: Current Loop Data Rate: 20 mA Wavelength D1410: 850 nm, Multimode D1410WDMA: 850/1310 nm, Multimode D1410WDMB: 850/1310 nm, Multimode Number Of Fibers D1410: 2 D1410WDMA: 1 D1410WDMB: 1 CONNECTORS Data and Power: Terminal Block with Screw Clamps Optical: ST Electrical & Mechanical Power: Surface Mount: 12 VDC @ 150 mA Rack: From Rack Number of Rack Slots: 1 Current Protection: Automatic Resettable Solid-State Current Limiters Circuit Board: Meets IPC Standard Size (in./cm.) (LxWxH) Surface Mount: 4.2 x 3.5 x 1.0 in., 10.7 x 8.9 x 2.5 cm Rack Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm