IFS A2325SHR

FM Audio Transmission • Up to 40 Remotes in Ring Topology • 20 Hz – 20kHz Bandwidth • 600 Ohms Audio Input Impedance • Provides a High Fault-Tolerant Emergency Broadcast Audio Distribution System • Transmits Balanced Line-Level Audio (2.2 Volts Peak-to-Peak) • No In-field Electrical or Optical Adjustments Required • Power and Communication Fault Status Indicating LEDs to Monitor System Performance • TTL Output for Signal Fault Alarm • Hot-Swappable Rack Modules • Automatic Resettable Fuses on all Power Lines • Distances up to 30 miles (49 km) without Repeaters • Comprehensive Lifetime Warranty

Specifications: Audio Audio: Balanced, simplex Input/Output Signal: 2.2 volts pk-pk Impedance: 600 ohms Bandwidth: 20 Hz - 20 KHz Signal-to-Noise Ratio (SNR): 60 dB Wavelength 850 or 1310nm, Multimode 1310 nm, Single Mode Number of fibers 2 In/2 Out Connectors Optical: ST Power and Audio: Terminal Block with Screw Clamps Electrical & Mechanical Power: Surface Mount: 12 V @ 200 mA Current Protection: Automatic Resettable Solid-State Current Limiters Circuit Board: Meets IPC Standard Size (in./cm.) (LxWxH) Surface Mount: 7.0 x 4.9 x 1.0 in., 17.8 x 12.5 x 2.5 cm Environmental MTBF: > 100,000 hours Operating Temp: -40° C to +74° C Storage Temp: -40° C to +85° C Relative Humidity: 0% to 95% (non-condensing)†