DBX 2215
Product Description
Features
* Revolutionary instant encode/decode Type III¨ Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB * Patent-pending PeakPlusª Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal * An extremely high quality EQ, patent-pending Type III¨ Noise Reduciton, and the elegant new PeakPlusª Limiter all in one great sounding box * Four segment LED bargraph for BOTH Gain Reduction AND Output Level offers the most comprehensive visual feedback available * Status LEDs offer visual feedback for all settings on the front panel
INPUT
Connectors: 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 200 ohm, unbalanced 100 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2k or greater >+18dBm balanced/unbalanced (into 600) SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +/-0.5dB
Frequency Response: <10Hz to >50kHz, +0.5/-3dB
Noise Reduction In: (+/-6 and +/-15dB range):
Signal-to-Noise: >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range: >120dB, unweighted
Noise Reduction Out: (+/-6dB range):
Signal-to-Noise: >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
Dynamic Range: >112dB, unweighted
Noise Reduction Out: (+/-15dB range):
Signal-to-Noise: >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range: >108dB, unweighted
THD + Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
Noise Reduction: Up to 20dB of dynamic broadband noise reduction FUNCTION SWITCHES
Type III NR: Activates dbx¨ Type III¨ Noise Reduction
EQ Bypass: Bypasses the Graphic Equalizer section in the signal path
Low Cut (recessed): Activates the 40Hz 18dB/octave Bessel high-pass filter
Range (recessed): Selects either +/- 6dB or +/-15dB slider boost/cut range INDICATORS
Output Level Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
Type III¨ NR Active: Yellow LED
EQ Bypass: Red LED
Clip: Red LED
Low Cut Active: Red LED
+/-6dB range: Yellow LED
+/-15dB range: Red LED POWER SUPPLY
Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz 230VAC 50/60Hz
Power consumption: 18W
Main Connection: IEC receptacle PHYSICAL
Dimensions: 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)
* Revolutionary instant encode/decode Type III¨ Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB * Patent-pending PeakPlusª Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal * An extremely high quality EQ, patent-pending Type III¨ Noise Reduciton, and the elegant new PeakPlusª Limiter all in one great sounding box * Four segment LED bargraph for BOTH Gain Reduction AND Output Level offers the most comprehensive visual feedback available * Status LEDs offer visual feedback for all settings on the front panel
INPUT
Connectors: 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Type: Electronically balanced/unbalanced, RF filtered
Impedance: Balanced 40k ohm, unbalanced 20k ohm
Max Input Level: >+21dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz OUTPUTS
Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Type: Impedance-balanaced/unbalanced, RF filtered
Impedance: Balanced 200 ohm, unbalanced 100 ohm
Max Output Level: >+21dBu balanced/unbalanced into 2k or greater >+18dBm balanced/unbalanced (into 600) SYSTEM PERFORMANCE
Bandwidth: 20Hz to 20kHz, +/-0.5dB
Frequency Response: <10Hz to >50kHz, +0.5/-3dB
Noise Reduction In: (+/-6 and +/-15dB range):
Signal-to-Noise: >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range: >120dB, unweighted
Noise Reduction Out: (+/-6dB range):
Signal-to-Noise: >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
Dynamic Range: >112dB, unweighted
Noise Reduction Out: (+/-15dB range):
Signal-to-Noise: >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
Dynamic Range: >108dB, unweighted
THD + Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
Noise Reduction: Up to 20dB of dynamic broadband noise reduction FUNCTION SWITCHES
Type III NR: Activates dbx¨ Type III¨ Noise Reduction
EQ Bypass: Bypasses the Graphic Equalizer section in the signal path
Low Cut (recessed): Activates the 40Hz 18dB/octave Bessel high-pass filter
Range (recessed): Selects either +/- 6dB or +/-15dB slider boost/cut range INDICATORS
Output Level Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
Type III¨ NR Active: Yellow LED
EQ Bypass: Red LED
Clip: Red LED
Low Cut Active: Red LED
+/-6dB range: Yellow LED
+/-15dB range: Red LED POWER SUPPLY
Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz 230VAC 50/60Hz
Power consumption: 18W
Main Connection: IEC receptacle PHYSICAL
Dimensions: 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)
 |
