DBX 1066
Product Description
Specifications
* Limiter o Threshold Range: 0 dBu to +24 dBu (off) o Ratio: :1 o Limiter Type: PeakStopPlus two-stage limiter + Stage 1: PeakStop¨ brickwall limiter # Attack Time: Zero # Release Time: Zero + Stage 2: Predictive intelligent program limiter # Attack Time: Program-dependent # Release Time: Program-dependent o Expander/Gate + Threshold Range: Off to +15 dBu + Ratio: 1:1 to 30:1 + Attack Time: < 100 µsec + Release Time: Program-dependent * Compressor o Threshold Range: -40 dBu to +20 dBu o Ratio: 1:1 to :1 o Threshold Characteristic: Selectable OverEasy¨ or hard knee o Attack/Release Characteristic: AutoDynamic o Attack/Release Modes: Selectable Manual or Auto o Manual Attack Time: Scalable program-dependent o Manual Release Time: Scalable program-dependent o Auto Attack Time: Program-dependent o Auto Release Time: Program-dependent o Output Gain: -20 to +20 dB * Output Connectors o XLR and 1/4" TRS (Pin 2 and tip hot) o Type: Servo-balanced/unbalanced, RF filtered o Impedance: Balanced 30 Ohm, unbalanced 15 Ohm o Max Output Level: > +22 dBm balanced, > +20 dBm unbalanced * Input Connectors o XLR and 1/4" TRS (Pin 2 and tip hot) o Type: Electronically balanced/unbalanced, RF filtered o Impedance: Balanced > 40 kOhm, unbalanced > 20 kOhm o Max Input Level: > +22 dBu balanced or unbalanced o CMRR: Typically > 50 dB at 1 kHz * Sidechain Input Connector o 1/4" TS o Type: Unbalanced, RF filtered o Impedance: > 10 kOhm o Max Input Level: > +22 dBu * Sidechain Output Connector o 1/4" TRS (tip hot) o Type: Impedance balanced, RF filtered o Impedance: Balanced 2 kOhm, unbalanced 1 kOhm o Max Output Level: > +21 dBu balanced or unbalanced * Power Supply o Operating Voltage: Switchable: 100-120 VAC 50/60 Hz or 200-240 VAC 50/60 Hz o Power Consumption: 20 Watts o Fuse: + 100-120 VAC: 250 mA Slow Blow + 200-240 VAC: 125 mA Type T o Mains Connection: IEC receptacle * Physical o Dimensions: 1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm) o Weight: 5.1 lbs (2.3 kg) o Shipping Weight: 7.5 lbs. (3.4 kg) * System Performance o Bandwidth: 20 Hz to 20 kHz, +0/0.5 dB o Frequency Response: 0.35 Hz to 90 kHz, +0/-3 dB o Noise: < -96 dBu, unweighted, 22 kHz measurement bandwidth o Dynamic Range: > 118 dB, unweighted o THD+Noise: 0.008% typical at +4 dBu, 1 kHz, unity gain 0.08% typical at +20 dBu, 1 kHz, unity gain < 0.1%, any amount of compression up to 40 dB, 1 kHz o IMD: < 0.1% SMPTE o Interchannel Crosstalk: < -80 dB 20 Hz to 20 kHz o Stereo Coupling: True RMS Power Summing * Note: Specifications subject to change
* Limiter o Threshold Range: 0 dBu to +24 dBu (off) o Ratio: :1 o Limiter Type: PeakStopPlus two-stage limiter + Stage 1: PeakStop¨ brickwall limiter # Attack Time: Zero # Release Time: Zero + Stage 2: Predictive intelligent program limiter # Attack Time: Program-dependent # Release Time: Program-dependent o Expander/Gate + Threshold Range: Off to +15 dBu + Ratio: 1:1 to 30:1 + Attack Time: < 100 µsec + Release Time: Program-dependent * Compressor o Threshold Range: -40 dBu to +20 dBu o Ratio: 1:1 to :1 o Threshold Characteristic: Selectable OverEasy¨ or hard knee o Attack/Release Characteristic: AutoDynamic o Attack/Release Modes: Selectable Manual or Auto o Manual Attack Time: Scalable program-dependent o Manual Release Time: Scalable program-dependent o Auto Attack Time: Program-dependent o Auto Release Time: Program-dependent o Output Gain: -20 to +20 dB * Output Connectors o XLR and 1/4" TRS (Pin 2 and tip hot) o Type: Servo-balanced/unbalanced, RF filtered o Impedance: Balanced 30 Ohm, unbalanced 15 Ohm o Max Output Level: > +22 dBm balanced, > +20 dBm unbalanced * Input Connectors o XLR and 1/4" TRS (Pin 2 and tip hot) o Type: Electronically balanced/unbalanced, RF filtered o Impedance: Balanced > 40 kOhm, unbalanced > 20 kOhm o Max Input Level: > +22 dBu balanced or unbalanced o CMRR: Typically > 50 dB at 1 kHz * Sidechain Input Connector o 1/4" TS o Type: Unbalanced, RF filtered o Impedance: > 10 kOhm o Max Input Level: > +22 dBu * Sidechain Output Connector o 1/4" TRS (tip hot) o Type: Impedance balanced, RF filtered o Impedance: Balanced 2 kOhm, unbalanced 1 kOhm o Max Output Level: > +21 dBu balanced or unbalanced * Power Supply o Operating Voltage: Switchable: 100-120 VAC 50/60 Hz or 200-240 VAC 50/60 Hz o Power Consumption: 20 Watts o Fuse: + 100-120 VAC: 250 mA Slow Blow + 200-240 VAC: 125 mA Type T o Mains Connection: IEC receptacle * Physical o Dimensions: 1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm) o Weight: 5.1 lbs (2.3 kg) o Shipping Weight: 7.5 lbs. (3.4 kg) * System Performance o Bandwidth: 20 Hz to 20 kHz, +0/0.5 dB o Frequency Response: 0.35 Hz to 90 kHz, +0/-3 dB o Noise: < -96 dBu, unweighted, 22 kHz measurement bandwidth o Dynamic Range: > 118 dB, unweighted o THD+Noise: 0.008% typical at +4 dBu, 1 kHz, unity gain 0.08% typical at +20 dBu, 1 kHz, unity gain < 0.1%, any amount of compression up to 40 dB, 1 kHz o IMD: < 0.1% SMPTE o Interchannel Crosstalk: < -80 dB 20 Hz to 20 kHz o Stereo Coupling: True RMS Power Summing * Note: Specifications subject to change
 |
