Crown IT6000
Product Description
Touring sound. Earth-shattering performance. I-Tech's patented class-I technology is the number one choice of touring professionals worldwide.
* Global Power Supply – designed to deliver maximum power no matter where your schedule takes you * Studio Quality Processing – integrated processing reduces DSP noise for a quieter overall system * Peak voltage and RMS power limiting protects your speaker investment * Front panel LCD provides diagnostics and preset selection to ensure fast and easy system setup * Front panel lockout – ensures that tunings and presets are safely stored and protected from curious users * Remote monitoring and control for complete system control anywhere in the venue Specifications: Frequency Response (at 1 watt, 20Hz - 20 kHz) ± 0.25 dB Signal to Noise Ratio below rated full-bandwidth power, A-weighted > 105 dB Total Harmonic Distortion (THD) at full rated power < 0.35% Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –35 dB < 0.35% Maximum Input Level +15 dBu or +21 dBu, depending on setting of maximum input level Latency (analog, digital inputs) Analog: 1.13 mS. Digital: See Sample Rate / Latency Table below. A/D, D/A Converters 24-bit 96 kHz Cirrus Logic Digital Input AES/EBU, 24-bit, 32-96 kHz. Onboard sample rate converter. Network Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware DSP 24-bit conversion with 32-bit, floating-point DSP processing Attenuators Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to –100 dB. Damping Factor (8 ohms): 20 Hz to 100 Hz > 5000 Crosstalk (below rated power, 20 Hz to 1 kHz) > 80 dB Common Mode Rejection (CMR) (20 Hz to 1 kHz) > 50 dB DC Output Offset (Shorted input) < ± 3 mV Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced Load Impedance (Note: Safe with all types of loads) Stereo Bridge Mono 1-2-4-8-16 ohms 2-4-8 ohms Required AC Mains Universal AC input, 100-240VAC (±15%), 50/60 Hz. Max. AC mains voltage 277VAC. AC Line Connector USA, UK, European, Australia, India Construction All Models Ventilation Flow-through ventilation from front to back Cooling Dual-zone, microprocessor controlled, continuously variable speed fans Dimensions EIA Standard 19-inch rack mount width (EIA RS-310B), 3.5-inch (8.9-cm) height, 16.2-inch (41.1-cm) depth behind front mounting surface
* Global Power Supply – designed to deliver maximum power no matter where your schedule takes you * Studio Quality Processing – integrated processing reduces DSP noise for a quieter overall system * Peak voltage and RMS power limiting protects your speaker investment * Front panel LCD provides diagnostics and preset selection to ensure fast and easy system setup * Front panel lockout – ensures that tunings and presets are safely stored and protected from curious users * Remote monitoring and control for complete system control anywhere in the venue Specifications: Frequency Response (at 1 watt, 20Hz - 20 kHz) ± 0.25 dB Signal to Noise Ratio below rated full-bandwidth power, A-weighted > 105 dB Total Harmonic Distortion (THD) at full rated power < 0.35% Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –35 dB < 0.35% Maximum Input Level +15 dBu or +21 dBu, depending on setting of maximum input level Latency (analog, digital inputs) Analog: 1.13 mS. Digital: See Sample Rate / Latency Table below. A/D, D/A Converters 24-bit 96 kHz Cirrus Logic Digital Input AES/EBU, 24-bit, 32-96 kHz. Onboard sample rate converter. Network Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware DSP 24-bit conversion with 32-bit, floating-point DSP processing Attenuators Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to –100 dB. Damping Factor (8 ohms): 20 Hz to 100 Hz > 5000 Crosstalk (below rated power, 20 Hz to 1 kHz) > 80 dB Common Mode Rejection (CMR) (20 Hz to 1 kHz) > 50 dB DC Output Offset (Shorted input) < ± 3 mV Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced Load Impedance (Note: Safe with all types of loads) Stereo Bridge Mono 1-2-4-8-16 ohms 2-4-8 ohms Required AC Mains Universal AC input, 100-240VAC (±15%), 50/60 Hz. Max. AC mains voltage 277VAC. AC Line Connector USA, UK, European, Australia, India Construction All Models Ventilation Flow-through ventilation from front to back Cooling Dual-zone, microprocessor controlled, continuously variable speed fans Dimensions EIA Standard 19-inch rack mount width (EIA RS-310B), 3.5-inch (8.9-cm) height, 16.2-inch (41.1-cm) depth behind front mounting surface
 |
