Crown CTS600
Product Description
Crown CTS600
Building on the foundation of the Com-Tech Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.
Features
* High power density in a 2RU chassis * Crown Switching Power Supply for lighter weight * Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation perchannel * 100V direct outputs * Legendary Crown class-I (BCA) and AB+B output topologies offer the best inamplifier reliability * Comprehensive array of indicators provide accurate diagnostics * Fully PIP2-compatible * HiQnet compatible
Power Output
* Dual mode, 2 ohms: 150W * Dual mode, 4, 8 or 16 ohms or 70V: 300W * Bridge mode, 4 ohms: 300W * Bridge mode, 8 or 16 ohms or 140V: 600W
Specifications
* Frequency Response (at 1 watt, 20Hz-20kHz): +/- 0.25dB * Signal to Noise Ratio below rated power (20Hz to 20kHz): 105dB A-weighted * Total Harmonic Distortion (THD) at full rated power, from 20Hz to 20kHz:<0.35% * Damping Factor: 10Hz to 100Hz: >3000 * Crosstalk (below rated power, 20Hz to 1kHz): >80 dB * Common Mode Rejection (CMR, 20Hz to 1kHz): 50 dB * DC Output Offset: <2mV * Input Impedance (nominal): 10 kilohms balanced, 5 kilohms unbalanced * Maximum Input Level: +20dBu before input compression, +32dBu absolutemaximum * Load Impedance (safe with all types of loads): Stereo: 2/4/8/16 ohms, 70V,100V. Bridge Mono: 4/8/16 ohms, 140V, 200V * Voltage Gain (at maximum level setting): 8/4 ohm operation, 1.4Vsensitivity: 63.9:1 (36dB) * Cooling: Continuously variable speed forced air, front-to-back airflow * Dimensions (W x H x D): 19" x 3.5" x 14.25"
Building on the foundation of the Com-Tech Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.
Features
* High power density in a 2RU chassis * Crown Switching Power Supply for lighter weight * Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation perchannel * 100V direct outputs * Legendary Crown class-I (BCA) and AB+B output topologies offer the best inamplifier reliability * Comprehensive array of indicators provide accurate diagnostics * Fully PIP2-compatible * HiQnet compatible
Power Output
* Dual mode, 2 ohms: 150W * Dual mode, 4, 8 or 16 ohms or 70V: 300W * Bridge mode, 4 ohms: 300W * Bridge mode, 8 or 16 ohms or 140V: 600W
Specifications
* Frequency Response (at 1 watt, 20Hz-20kHz): +/- 0.25dB * Signal to Noise Ratio below rated power (20Hz to 20kHz): 105dB A-weighted * Total Harmonic Distortion (THD) at full rated power, from 20Hz to 20kHz:<0.35% * Damping Factor: 10Hz to 100Hz: >3000 * Crosstalk (below rated power, 20Hz to 1kHz): >80 dB * Common Mode Rejection (CMR, 20Hz to 1kHz): 50 dB * DC Output Offset: <2mV * Input Impedance (nominal): 10 kilohms balanced, 5 kilohms unbalanced * Maximum Input Level: +20dBu before input compression, +32dBu absolutemaximum * Load Impedance (safe with all types of loads): Stereo: 2/4/8/16 ohms, 70V,100V. Bridge Mono: 4/8/16 ohms, 140V, 200V * Voltage Gain (at maximum level setting): 8/4 ohm operation, 1.4Vsensitivity: 63.9:1 (36dB) * Cooling: Continuously variable speed forced air, front-to-back airflow * Dimensions (W x H x D): 19" x 3.5" x 14.25"
 |
