AKG Acoustics C568B
Product Description
* Compact, short shotgun microphone
* Integrated, switchable bass cut filter minimizes mechanical noise
* Operates on phantom power
High directivity and wide frequency response in a relatively short shotgun make this microphone a perfect tool for theater, sound reinforcement, and film/TV applications.
Due to its compact and lightweight design, the C 568 B is ideal for camera mount applications. Below 500 Hz it functions as a hypercardioid microphone; above 500 Hz the acoustic interference tube introduces increasing directivity. A switchable 12 dB/octave 120 Hz bass cut filter effectively suppresses rumble and wind noise. The rugged, all-metal body contains the built-in preamp. Phantom powering (9–52 V) required; foam windscreen and stand adapter included.
Specification: Polar pattern hypercardioid/directional Frequency range 20 to 20,000 Hz Sensitivity 11 mV/Pa (-39 dBV) Max. SPL 128 dB Equivalent noise level (CCIR 468-3) 29 dB Equivalent noise level 18 dB-A Signal/noise ratio 76 dB Bass filter 12 dB/octave at 120 Hz Impedance 600 ohms Recommended load impedance >2000 ohms Supply voltage 9 to 52 V phantom power to DIN 45596 Powering <2 mA Connector 3-pin XLR Finish dark gray
High directivity and wide frequency response in a relatively short shotgun make this microphone a perfect tool for theater, sound reinforcement, and film/TV applications.
Due to its compact and lightweight design, the C 568 B is ideal for camera mount applications. Below 500 Hz it functions as a hypercardioid microphone; above 500 Hz the acoustic interference tube introduces increasing directivity. A switchable 12 dB/octave 120 Hz bass cut filter effectively suppresses rumble and wind noise. The rugged, all-metal body contains the built-in preamp. Phantom powering (9–52 V) required; foam windscreen and stand adapter included.
Specification: Polar pattern hypercardioid/directional Frequency range 20 to 20,000 Hz Sensitivity 11 mV/Pa (-39 dBV) Max. SPL 128 dB Equivalent noise level (CCIR 468-3) 29 dB Equivalent noise level 18 dB-A Signal/noise ratio 76 dB Bass filter 12 dB/octave at 120 Hz Impedance 600 ohms Recommended load impedance >2000 ohms Supply voltage 9 to 52 V phantom power to DIN 45596 Powering <2 mA Connector 3-pin XLR Finish dark gray
 |
