AKG Acoustics C562CM
Product Description
The C 562 CM offers the inherent features of a boundary layer microphone: 6-dB higher sensitivity and elimination of comb filter effects when mounted in a large reflecting surface. Its response is uniform to 20kHz, and the polar pattern is omnidirectional. A-weighted signal-to-noise ratio is a remarkable 78 dB.
The microphone’s small size makes it ideal for flush-mount installation in any plane surface in a performing environment, including ceilings, walls and stage sets. Its 10 ft. (3 m) attached cable terminates in a 0.125 in. (3.5 mm) male jack, which fits through a 0.5 in. (12.7 mm) mounting hole. An accompanying phantom power adapter provides an electronically balanced low impedance output via a 3-pin XLR-M connector.
Features
* Small & inconspicuous * Wide frequency range * High sensitivity
Specifications
* Transducer Principle: Condenser prepolarized * Frequency Range: 20-20,000 Hz * Polar Pattern: Omnidirectional * Sensitivity at 1,000 Hz: 25 mV/Pa (-34 dBV) * Equivalent Noise Level: < 16 dB-A * Sound Pressure Level for 1% THD: 130 dB * S/N Ratio (A-weighted): > 78 dB * Electr. Impedance: < 600 ohms * Load Impedance: > 2000 ohms * Power Requirement: 9–52 volts phantom powering * Connector: 3-Pin XLR-type * Cable Length: 10 ft. (3 m) * Finish: Satin nickel * Size: 0.8 in.dia./1.1 in. length (20 mm dia./28 mm length) * Special Features/Applications: Boundary layer microphone * Included Accessories: Phantom power adapter * Optional Accessories: B 18 Battery power supply
The microphone’s small size makes it ideal for flush-mount installation in any plane surface in a performing environment, including ceilings, walls and stage sets. Its 10 ft. (3 m) attached cable terminates in a 0.125 in. (3.5 mm) male jack, which fits through a 0.5 in. (12.7 mm) mounting hole. An accompanying phantom power adapter provides an electronically balanced low impedance output via a 3-pin XLR-M connector.
Features
* Small & inconspicuous * Wide frequency range * High sensitivity
Specifications
* Transducer Principle: Condenser prepolarized * Frequency Range: 20-20,000 Hz * Polar Pattern: Omnidirectional * Sensitivity at 1,000 Hz: 25 mV/Pa (-34 dBV) * Equivalent Noise Level: < 16 dB-A * Sound Pressure Level for 1% THD: 130 dB * S/N Ratio (A-weighted): > 78 dB * Electr. Impedance: < 600 ohms * Load Impedance: > 2000 ohms * Power Requirement: 9–52 volts phantom powering * Connector: 3-Pin XLR-type * Cable Length: 10 ft. (3 m) * Finish: Satin nickel * Size: 0.8 in.dia./1.1 in. length (20 mm dia./28 mm length) * Special Features/Applications: Boundary layer microphone * Included Accessories: Phantom power adapter * Optional Accessories: B 18 Battery power supply
 |
