AKG Acoustics C542BL
Product Description
* Extremely small and inconspicuous, lightweight yet rugged
* Delivers superior sound combined with outstanding ease of use
* High sensitivity and low self-noise ensures generous headroom
The C 542 BL is a high-quality boundary microphone designed to deliver superior results for a multitude of recording applications. The boundary layer technique is well-known for recording and offers non-directional pickup that is frequencyindependent.
Succeeding the proven C 562 BL, the C 542 BL is small, lightweight and easy to place . no stand is needed. Since the transducer sits in a metal plate only 5 mm (0.2 in) thick, the plate doesn’t interfere with or color the sound. Frequency response is very uniform within its hemisphere and it captures the “room sound’’ of an instrument very accurately.
The C 542 BL can be permanently attached to the floor or wall of a studio using the screw holes in the plate or attached temporarily using the supplied adhesive compound. Its 3-pin output connector also has a switchable bass-cut filter to minimize surface-born noise.
Easy to use and sonically versatile, the C 542 BL is a great addition to the “mic locker’’ of any studio.
Specifications: Polar pattern omnidirectional (hemispherical) Frequency range 20 Hz to 20 kHz Sensitivity 20 mV/Pa (-34 dBV) Max. SPL 130 dB (for 1% THD) Equivalent noise level (CCIR 468-3) 26 dB Equivalent noise level 16 dB-A Signal/noise ratio (A-weighted) 78 dB Bass filter switchable flat or 150 Hz, 12 dB/octave Impedance <600 ohms Recommended load impedance >=2.000 ohms Supply voltage 9 to 52 V phantom power to DIN 45596 Powering <2 mA Connector 3-pin XLR Finish dark gray
The C 542 BL is a high-quality boundary microphone designed to deliver superior results for a multitude of recording applications. The boundary layer technique is well-known for recording and offers non-directional pickup that is frequencyindependent.
Succeeding the proven C 562 BL, the C 542 BL is small, lightweight and easy to place . no stand is needed. Since the transducer sits in a metal plate only 5 mm (0.2 in) thick, the plate doesn’t interfere with or color the sound. Frequency response is very uniform within its hemisphere and it captures the “room sound’’ of an instrument very accurately.
The C 542 BL can be permanently attached to the floor or wall of a studio using the screw holes in the plate or attached temporarily using the supplied adhesive compound. Its 3-pin output connector also has a switchable bass-cut filter to minimize surface-born noise.
Easy to use and sonically versatile, the C 542 BL is a great addition to the “mic locker’’ of any studio.
Specifications: Polar pattern omnidirectional (hemispherical) Frequency range 20 Hz to 20 kHz Sensitivity 20 mV/Pa (-34 dBV) Max. SPL 130 dB (for 1% THD) Equivalent noise level (CCIR 468-3) 26 dB Equivalent noise level 16 dB-A Signal/noise ratio (A-weighted) 78 dB Bass filter switchable flat or 150 Hz, 12 dB/octave Impedance <600 ohms Recommended load impedance >=2.000 ohms Supply voltage 9 to 52 V phantom power to DIN 45596 Powering <2 mA Connector 3-pin XLR Finish dark gray
 |
