AKG Acoustics C 519ML
Product Description
* Miniature condenser clip-on microphone for wind instruments, drums, and percussions
* Miniature gooseneck for accurate microphone alignment
* Including wireless direct adapter for easy use with AKG pocket transmitters
* Detachable microphone cable
* Transducer shock mount for high mechanical-noise rejection
The C 519 clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound.
The C 519 M features an integrated, switchable bass cut for adjusting the microphone’s frequency response to your instrument's sound. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters.
Versions: C 519 ML for use with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.
Specifications: Polar pattern cardioid Frequency range 60 Hz to 20 kHz Sensitivity 5 mV/Pa (-46 dBV) Max. SPL 130/132 dB SPL (for 1 %/3 % THD) Equivalent noise level 31 dB(A) Signal/noise ratio (A-weighted) 63 dB Impedance <= 200 ohms Recommended load impedance >= 2000 ohms Powering <= 2 mA Power requirement B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters Connector 3-pin mini XLR Cable 1.5 m (5 ft.) Finish matte black Dimensions Length: 213 mm (8.4 in.) (microphone only); max. width: 47 mm (1.9 in.)
The C 519 clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful, and clear sound.
The C 519 M features an integrated, switchable bass cut for adjusting the microphone’s frequency response to your instrument's sound. The unique adapter plate A 400 allows easy attachment of the AKG pocket transmitters.
Versions: C 519 ML for use with the B 29 L battery power supply, AKG WMS Series bodypack transmitters, or the MPA V L adapter for external phantom powering.
Specifications: Polar pattern cardioid Frequency range 60 Hz to 20 kHz Sensitivity 5 mV/Pa (-46 dBV) Max. SPL 130/132 dB SPL (for 1 %/3 % THD) Equivalent noise level 31 dB(A) Signal/noise ratio (A-weighted) 63 dB Impedance <= 200 ohms Recommended load impedance >= 2000 ohms Powering <= 2 mA Power requirement B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters Connector 3-pin mini XLR Cable 1.5 m (5 ft.) Finish matte black Dimensions Length: 213 mm (8.4 in.) (microphone only); max. width: 47 mm (1.9 in.)
 |
